WM LIGHT

Description
Removable loading ramp. It is the most versatile model in the WM range and is very well suited to light loads, up to 400 kg.
Features
weight

Weight

400kg

expand

Handling

Removable

square_foot

Custom size

Length from 150 to 325 cm, Width from 40 to 105 cm

  • Mobile band connecting to the piano
  • Non-slip anodized aluminum top
  • Quick release and coupling
  • Two wheels for easy opening
PERSONALIZED QUOTE
videogame_asset AUTOMATIC GAME DISTRIBUTORS
restaurant CATERING
local_shipping COURIER CHARTERERS
accessible_forward DISABLED PASSENGER TRANSPORT
festival EVENTS CONCERTS
plumbing HYDRAULIC ELECTRICIANS
local_laundry_service INDUSTRIAL LAUNDRIES
medical_services MEDICAL AMBULANCES
motorcycle MOTORCYCLES BICYCLES
cleaning_services MULTI-UTILITY SMALL CLEANING
The WM LIGHT loading ramp is the most versatile model in the WM range. Made entirely of anodised aluminium, it is very suitable for light loads up to 400 kg. The customer can choose the width and length of the ramp, creating a product tailored to their commercial vehicle. The WM LIGHT is easy to install (assembly time of 2 hours) and can be easily removed from the vehicle leaving the loading deck completely free. The ramp weighs between 34 and 75 kg, depending on the size required. The gas spring system balances the weight of the ramp and makes it super light during opening and closing operations, allowing anyone to handle the ramp safely and without any effort. The WM LIGHT ramp can also be used as a bridge connecting two surfaces placed at different heights, for example between the vehicle and other support surfaces, such as steps, platforms etc... This is done by a pin that locks the hinges of the ramp. An important feature of this model is the mobile strip that connects perfectly to the vehicle plane, avoiding creating steps with the loading plane. The ramp that touches the ground is straight and fixed. This belt is suitable for all machines, especially those with a low height from the ground and small wheels. On request it is possible to have the curved and mobile rear side, recommended for use on a bridge.
DATA SHEET AND WEIGHTS

See PDF

GENERAL CATALOGUE

See PDF

Handling

Deployment and swivelling

An external swivel kit is supplied on request, making it possible to open the ramp in the vertical direction, like a second door. This system makes it possible to gain access to the van’s cargo area without using the ramp (e.g. for loading pallets with a forklift truck).

Removability and transportation

The ramp can be easily removed from the vehicle by means of the side handles. Once the ramp has been removed, the vehicle cargo area is completely unobstructed. A quick coupling system makes it possible to transfer the ramp from one vehicle to another very quickly.

How it works?

Contact us for a personal consultation, our experts are happy to help you. Tell us:

help
TYPE OF GOODS
weight
DIMENSIONS AND WEIGHT OF THE GOODS
local_shipping
MODEL OF VEHICLE
PERSONALIZED QUOTE

All WM System ramps have

Image 1 description
CONFIRMATION
OF QUALITY TÜV
content_paste_off
TYPE-APPROVAL
NOT REQUIRED
Image 2 description
100% MADE IN ITALY
workspace_premium
2 YEARS OF WARRANTY

We solve all loading and unloading needs

Compose your own custom ramp

We design tailor-made solutions based on the needs of our customers, offering customized ramps for each type of vehicle.

Choose your options:

    Accessorio 1
    ADDITIONAL KIT THIRD PIECE

    Reduces the angle of the ramp which is foldable in 3 pieces. It is ideal on small vehicles. Available for load capacities up to 1,000 kg, maximum width 100 cm and fixed length 80 cm.

    Photo Gallery
    Accessorio 2
    EXTERNAL ROTATION

    Rotation kit that allows to rotate the ramp towards the outside of the van by 90°. Allows access to the vehicle compartment without using the platform (e.g. pallet loading by means of forklifts on the van).

    Photo Gallery
    Accessorio 3
    CURVED MOBILE BAND

    Mobile curved strip suitable for use the ramp as a bridge to connect two surfaces placed at different heights.

    Photo Gallery
    Accessorio 4
    DRILLED FLOOR WITH CONVEX HOLES

    Exclusively for WM System. Surface in perforated aluminium with alternating convex holes. For maximum grip in water, rain, snow and extreme lightness.

    Photo Gallery
    Accessorio 5
    FIXED MOUNTING

    On request it is possible to mount a fixed base on the ramp. This way the ramp is fixed and no longer removable from the vehicle. This solution simplifies and speeds up the assembly operations, which are estimated to take 30 minutes.

    Photo Gallery
    Accessorio 6
    PIN FOR USE ON BRIDGE

    Thanks to a special pin that locks the hinges of the ramp, it can be used as a bridge to connect two surfaces at different heights (vehicle and steps, platforms, etc...).

    Photo Gallery
    Accessory 7
    ENGRAVING

    Add a unique touch to your ramp with a personalized engraving, perfect for logos, text, or decorative patterns.

    Photo Gallery
    Accessory 8
    COLORING

    Coloring of the entire ramp, including the walking surface. There are 5 available colors, but custom colors can be requested.

    Photo Gallery

    Your vehicle (Optional)

    What are you carrying (Optional)

    Your information

    How would you like to be contacted?

    MailTelefono

    Your frequently asked questions

    Here you will find answers to the most common questions about WM System manufacturers and services.  Whether it’s technical details, installation and maintenance information or clarification of our processes, you’ll find everything you need to make the most of our innovative solutions.

    Find your answer

    IS APPROVED IN THE VEHICLE?

    No, approval is not required. The ramp is "one load" and therefore the vehicle should not be re-approved. Except for disabled people transport.

    WHAT IS THE MODEL FOR MY VAN AND USE?

    The Wm System ramps are customizable in size and capacity and can be adapted to all commercial vehicles. To advise you on the best solution, we need to receive the following information: -make, model, year of registration, traction, height of the rear door of the van and -type and total weight of the goods/machinery you are loading.

    IS IT OK FOR PICK UP?

    No, the Wm ramps are suitable for closed vehicles. It would result in a wind barrier

    WHO CAN USE THE RAMP?

    All those who have material on wheels to move, up and down the van. And all that color moving the material with pallet trucks.

    IS IT EASY TO ASSEMBLE?

    Yes, from 2 hours for the lightest models to 4 hours of assembly for the most complete models. We suggest the body shop nearest you, where to go for installation.